PV180R1K1T1NML1
DESCRIPTION:
Parker PVplus axial piston pump with variable displacement has been designed and optimized for demanding use in heavy duty industrial and marine applications. With pressure ratings of up to 420 bar and high-speed ratings this open circuit, swashplate principle axial piston pump provides high productivity and power density to its users. Beside its robustness and exceptionally long service life, PVplus is also characterized by a very high conversion flexibility. As a standard every PVplus comes with an integrated pre-compression volume which ensures low ripple operation and reduced noise emissions. A wide range of displacements and control options allows for a wide range of applications.
TECHNICAL DESCRIPTION:
| Pump Type: | Piston , Variable |
| Body Material: | Cast Iron |
| Configuration: | Single , Tandem , Multiple |
| Displacement: | 16 to 360 cm3/rev, 1 to 22 inch3/rev |
| Operating Pressure: | 420 bar, 6000 psi |
| Flow Rate: | 12 to 166 gal/min, 48 to 630 L/min |
| For Fluid Type: | Standard Hydraulic Fluids , Water-Glycol , Biodegradable , Fire Resistant |
| Technology: | Hydraulics |
| Media: | Hydraulic Fluids , Liquids |
| Maximum Operating Speed: | 3000 RPM |
| Minimum Fluid Temperature: | -40 °C, -40 °F |
| Maximum Fluid Temperature: | 115 °C, 239 °F |
| Weight: | 186 kg, 410 lb |
| Shaft Type: | SAE , ISO |
| Mounting Option: | SAE , ISO |
| Port Type: | Flange , Straight Threaded |
| Port Connection: | SAE , ISO , BSPP |
| Direction of Rotation: | Clockwise , Counterclockwise |
| Circuit Path: | Open |
| Sensor Type: | Pressure , Displacement |
| Maximum Noise Level: | 96 dBA |
| Drain Option: | YES |
| Filter Included: | NO |
| Radial Load Capacity: | Consult Parker |
| Minimum Kinematic Viscosity: | 80 SUS |
| Maximum Kinematic Viscosity: | 3880 SUS |
| Thru-Drive Capability: | YES |
| Energy Recovery Capability: | NO |
| Control Method: | Pressure , Remote Pressure , Load Sense , Electronic Control , Unloading , Proportional Pressure |
| Charge Pump Included: | NO |
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.